Cannabis Candles

 

If you love the beautifully strong scent of cannabis — and enjoy a very relaxing candle. Then this DIY is just for you.

This easy candle tutorial is everything you’ve been dreaming of, and the end product is even better than the store-bought variety because you can personalize them with your favorite scents and colors. They’re perfect for decorating your own home, and they make for great gifts, too.

How to make scented candles

Supplies:Wax flakes
Pre-waxed candle wicks
Containers for candles
Nontoxic crayon or candle color block
Essential oils
Cannabis oils
Glass container
Saucepan or pot
Skewers or chopsticks
Tape
Stove
Scissors

Directions:

Note: You’ll want to start off by cleaning your glass containers. Using regular dish soap will do the job; just make sure you dry them thoroughly when you’re done.

Step 1: Setting up your wicks

To set up the candlewicks in your containers, you’ll want to lay the metal piece flat against the bottom. Then, use your chopsticks/skewers to hold up the wicks, and tape the ends of the chopsticks to keep everything in place.

More: Simple Halloween craft ideas to get you in the spooky spirit

Step 2: Measuring the wax flakes

Measure out the amount of candle wax flakes you’ll need for each of your containers. The rule of thumb is two times the amount of wax flakes to fill each container.

Step 3: Melting the wax

Fill a saucepan with water to about the halfway mark. Place your measured amount of wax flakes in the glass container. Then place the glass container in the saucepan. Be sure the water level is low enough, so it won’t splash into the wax flakes when it starts to boil. Turn your stove on to medium-high, and use a metal spoon to stir occasionally.

More: How to upcycle old picture frames you were going to throw out

Step 4: Adding color to your candles

This is an optional step. Your candles will come out a naturally milky white, but if you’d like to add a little color, you can use a nontoxic crayon or candle color block. I typically use 1/8-inch of red crayon per 16-ounces of wax flakes to get a soft pastel color. Want a brighter color? Use a little bit more, only adding color a bit at a time. Like food coloring, a small amount goes a long way. Simply melt your color along with your wax flakes. Warning: The color will look a lot brighter in the melted mixture but will turn a milky color as it cools.

Step 5: Add scent

Once all the wax is completely melted, remove the wax mixture from the stove. My rule of thumb is 10 drops of essential oil per 16 ounces of wax. It makes for a moderately scented candle. Use less or more depending on taste, and feel free to experiment and mix oils to create a scent of your own. Add the measured amount of essential oil to your wax mixture and give it a good stir to make sure it’s well mixed.

Step 6: Pouring the wax with the Cannabis oils

Make sure your containers are in a good location where they won’t need to be moved for a few hours. Then slowly pour your melted wax mixture into your containers while pouring in your warmed up cannabis oil. This will allow the cannabis oils to burn through the whole candle instead of burning up quickly or taking to long.

More: How to spray paint your furniture so pretty, so fly
also: You may have a cartridge you are warming up to extract the oils, or you can us a syringe that filled with cannabis oils.

Step 7: Setting your candle

Allow 3 to 4 hours for your candles to cool and solidify. It’s best to let them solidify at room temperature, so the cooling process is gradual. This prevents cracks in the wax.

Test is out, you can get a room full of people feeling well and loose by the end of your gathering. Be safe and have fun!

Leave a Reply